The zero stage boot is the XuanTie processor init code before opensbi. Before zero_stage_boot, SoC vendors must prepare ddr_init and CPU reset procedures. All harts would get into zero_stage_boot together, and the first one would duty to relocate GOT & offset variable, and others wait. Every hart would init its CSRs by their CPUID versions separately, allowing different harts to work together, e.g., 4*c908 + 2*c910. You could compile standard opensbi and Linux kernel binaries from open-source repositories, all compatible with XuanTie processors. Here is the simple boot flow:
[Jtag gdbinit] -> [zero_stage_boot] -> [opensbi] -> [Linux] opensbi: https://github.com/riscv-software-src/opensbi Linux: https://kernel.org/
Compiling zero_stage_boot is very straightforward, requiring only a standard RISC-V GCC compiler:
CROSS_COMPILE=riscv64-unknown-linux-gnu- make
However, we strongly recommend using the released binaries for the FPGA bringup. Click the Releases button on the right to obtain pre-compiled binaries for zsb, OpenSBI, and Image (Linux). These binary files have undergone comprehensive testing prior to release and contain detailed and precise version information.
-
64lp64 means running lp64 ABI on 64-bit Hardware.
-
32ilp32 means running ilp32 ABI on 32-bit Hardware.
-
64ilp32 means running ilp32 ABI on 64-bit Hardware.
-
zsb means zero_stage_boot.
-
Linux-5.10 + opensbi-0.9 is for early customers.
-
Linux-6.6 + opensbi-1.3 is for current.
-
zsb-64lp64-xt is simply recompiled with a custom compiler; functionally, it is identical to zsb-64lp64.
For a rv64 processor, you can download zsb-64lp64.tar.gz + opensbi-1.3-64lp64.tar.gz + linux-6.6-64lp64.tar.gz and prepare your own DTS + gdbinit.
Then, you can use Jtag to run FPGA Platform.
The XuanTie C9xx DTB provided to OpenSBI generic firmware will usually have "thead,c900-clint", "thead,c900-plic", compatible strings.
/dts-v1/;
/ {
model = "Test Sample";
compatible = "test,sample";
#address-cells = <2>;
#size-cells = <2>;
memory@60000000 {
device_type = "memory";
Caution: Determine your own address here
reg = <0x0 0x60000000 0x0 0x40000000>;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
timebase-frequency = <25000000>;
cpu@0 {
device_type = "cpu";
reg = <0>;
status = "okay";
compatible = "riscv";
riscv,isa = "rv64imafdc_zicbom_svpbmt_sstc_sscofpmf";
riscv,cbom-block-size = <64>;
mmu-type = "riscv,sv57";
cpu0_intc: interrupt-controller {
#address-cells = <0>;
#interrupt-cells = <1>;
compatible = "riscv,cpu-intc";
interrupt-controller;
};
};
cpu@1 {
device_type = "cpu";
reg = <1>;
status = "okay";
compatible = "riscv";
riscv,isa = "rv64imafdc_zicbom_svpbmt_sstc_sscofpmf";
riscv,cbom-block-size = <64>;
mmu-type = "riscv,sv57";
cpu1_intc: interrupt-controller {
#address-cells = <0>;
#interrupt-cells = <1>;
compatible = "riscv,cpu-intc";
interrupt-controller;
};
};
cpu@2 {
device_type = "cpu";
reg = <2>;
status = "okay";
compatible = "riscv";
riscv,isa = "rv64imafdc_zicbom_svpbmt_sstc_sscofpmf";
riscv,cbom-block-size = <64>;
mmu-type = "riscv,sv57";
cpu2_intc: interrupt-controller {
#address-cells = <0>;
#interrupt-cells = <1>;
compatible = "riscv,cpu-intc";
interrupt-controller;
};
};
cpu@3 {
device_type = "cpu";
reg = <3>;
status = "okay";
compatible = "riscv";
riscv,isa = "rv64imafdc_zicbom_svpbmt_sstc_sscofpmf";
riscv,cbom-block-size = <64>;
mmu-type = "riscv,sv57";
cpu3_intc: interrupt-controller {
#address-cells = <0>;
#interrupt-cells = <1>;
compatible = "riscv,cpu-intc";
interrupt-controller;
};
};
};
soc {
#address-cells = <2>;
#size-cells = <2>;
compatible = "simple-bus";
dma-noncoherent;
ranges;
clint0: clint@c000000 {
compatible = "thead,c900-clint";
interrupts-extended = <
&cpu0_intc 3 &cpu0_intc 7
&cpu1_intc 3 &cpu1_intc 7
&cpu2_intc 3 &cpu2_intc 7
&cpu3_intc 3 &cpu3_intc 7
>;
reg = <0x0 0x0c000000 0x0 0x04000000>;
Caution: Determine your own address here
clint,has-no-64bit-mmio;
};
intc: interrupt-controller@8000000 {
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "thead,c900-plic";
reg = <0x0 0x08000000 0x0 0x04000000>;
Caution: Determine your own address here
riscv,ndev = <64>;
interrupt-controller;
interrupts-extended = <
&cpu0_intc 0xffffffff &cpu0_intc 9
&cpu1_intc 0xffffffff &cpu1_intc 9
&cpu2_intc 0xffffffff &cpu2_intc 9
&cpu3_intc 0xffffffff &cpu3_intc 9
>;
};
};
};
The XuanTie C9xx DTB provided to OpenSBI generic firmware will usually have "riscv,clint0", "riscv,plic0", compatible strings.
/dts-v1/;
/ {
model = "Test Sample";
compatible = "test,sample";
#address-cells = <2>;
#size-cells = <2>;
memory@60000000 {
device_type = "memory";
Caution: Determine your own address here
reg = <0x0 0x60000000 0x0 0x40000000>;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
timebase-frequency = <25000000>;
cpu@0 {
device_type = "cpu";
reg = <0>;
status = "okay";
compatible = "riscv";
riscv,isa = "rv64ima";
mmu-type = "riscv,sv39";
cpu0_intc: interrupt-controller {
#address-cells = <0>;
#interrupt-cells = <1>;
compatible = "riscv,cpu-intc";
interrupt-controller;
};
};
cpu@1 {
device_type = "cpu";
reg = <1>;
status = "okay";
compatible = "riscv";
riscv,isa = "rv64ima";
mmu-type = "riscv,sv39";
cpu1_intc: interrupt-controller {
#address-cells = <0>;
#interrupt-cells = <1>;
compatible = "riscv,cpu-intc";
interrupt-controller;
};
};
cpu@2 {
device_type = "cpu";
reg = <2>;
status = "okay";
compatible = "riscv";
riscv,isa = "rv64ima";
mmu-type = "riscv,sv39";
cpu2_intc: interrupt-controller {
#address-cells = <0>;
#interrupt-cells = <1>;
compatible = "riscv,cpu-intc";
interrupt-controller;
};
};
cpu@3 {
device_type = "cpu";
reg = <3>;
status = "okay";
compatible = "riscv";
riscv,isa = "rv64ima";
mmu-type = "riscv,sv39";
cpu3_intc: interrupt-controller {
#address-cells = <0>;
#interrupt-cells = <1>;
compatible = "riscv,cpu-intc";
interrupt-controller;
};
};
};
soc {
#address-cells = <2>;
#size-cells = <2>;
compatible = "simple-bus";
ranges;
clint0: clint@c000000 {
compatible = "riscv,clint0";
interrupts-extended = <
&cpu0_intc 3 &cpu0_intc 7
&cpu1_intc 3 &cpu1_intc 7
&cpu2_intc 3 &cpu2_intc 7
&cpu3_intc 3 &cpu3_intc 7
>;
reg = <0x0 0x0c000000 0x0 0x04000000>;
Caution: Determine your own address here
clint,has-no-64bit-mmio;
};
intc: interrupt-controller@8000000 {
#address-cells = <0>;
#interrupt-cells = <1>;
compatible = "riscv,plic0";
reg = <0x0 0x08000000 0x0 0x04000000>;
Caution: Determine your own address here
riscv,ndev = <64>;
interrupt-controller;
interrupts-extended = <
&cpu0_intc 0xffffffff &cpu0_intc 9
&cpu1_intc 0xffffffff &cpu1_intc 9
&cpu2_intc 0xffffffff &cpu2_intc 9
&cpu3_intc 0xffffffff &cpu3_intc 9
>;
};
};
};
# Set gdb environment set confirm off set height 0 monitor set resume-bkpt-exception on # memory layout set $opensbi_addr = 0x60000000 set $vmlinux_addr = $opensbi_addr + 0x00400000 set $rootfs_addr = $opensbi_addr + 0x04000000 set $dtb_addr = $rootfs_addr - 0x00100000 set $zsb_addr = $rootfs_addr - 0x00008000 set $dyninfo_addr = $rootfs_addr - 0x40 set $flag_addr = $rootfs_addr - 0x100 # Load kernel restore zero_stage_boot.bin binary $zsb_addr restore <preceding dts example>.dtb binary $dtb_addr restore fw_dynamic.bin binary $opensbi_addr restore Image binary $vmlinux_addr # Set opensbi dynamic info param set *(unsigned long *)($dyninfo_addr) = 0x4942534f set *(unsigned long *)($dyninfo_addr + 8) = 2 set *(unsigned long *)($dyninfo_addr + 16) = $vmlinux_addr set *(unsigned long *)($dyninfo_addr + 24) = 1 set *(unsigned long *)($dyninfo_addr + 32) = 0 set *(unsigned long *)($dyninfo_addr + 40) = -1 # Set boot flag for CPU functional setting # This flag.BIT[0] makes zsb enable RV64XT32 by setting mxstatus.[63]=1 # set *(unsigned int *)$flag_addr = 0x1 set *(unsigned int *)$flag_addr = 0x0 # PLIC delegate (Only opensbi-0.9 & Linux-5.10 need it) set *0x081ffffc=1 # Set all harts reset address set *0x18030010 = $zsb_addr set *0x18030018 = $zsb_addr set *0x18030020 = $zsb_addr set *0x18030028 = $zsb_addr set *0x18030030 = $zsb_addr set $pc = $zsb_addr # Release all harts from reset set *0x18030000 = 0x7f # If you don't have a reset controller in SoC, and harts reset into bootrom's loop code. # Then, Use below method: # thread 1 # set $pc = $zsb_addr # thread 2 # set $pc = $zsb_addr # thread 3 # set $pc = $zsb_addr # thread 4 # set $pc = $zsb_addr # thread 5 # set $pc = $zsb_addr # -ex "c" would let all harts jump to $zsb_addr.
Start Jtag Server.
DebugServerConsole -prereset
Then use gdb connect the Jtag Server.
riscv64-elf-gdb -ex "tar remote <Jtag Server ip:port>" -x <your soc gdbinit> -x <preceding cpu gdbinit> -ex "c"
Use ctrl+c to get into the gdb shell.
file vmlinux source gdbmarcos.txt dmesg
gdbmacros.txt:
vmlinux: The Linux kernel ELF file
The configuration of PMU can be referred to OpenSBI SBI PMU extension
The following is an example of PMU configuration for the Xuantie C-series CPU, which may need to be modified according to the datasheet during actual use.
pmu {
compatible = "riscv,pmu";
riscv,event-to-mhpmevent =
/* PMU_HW_CACHE_REFERENCES -> ll_cache_read_access */
<0x00003 0x00000000 0x00000010>,
/* PMU_HW_CACHE_MISSES -> ll_cache_read_miss */
<0x00004 0x00000000 0x00000011>,
/* PMU_HW_BRANCH_INSTRUCTIONS -> inst_branch */
<0x00005 0x00000000 0x00000007>,
/* PMU_HW_BRANCH_MISSES -> inst_branch_mispredict */
<0x00006 0x00000000 0x00000006>,
/* PMU_HW_STALLED_CYCLES_FRONTEND -> ifu_stalled_cycle */
<0x00008 0x00000000 0x00000027>,
/* PMU_HW_STALLED_CYCLES_BACKEND -> idu_stalled_cycle */
<0x00009 0x00000000 0x00000028>,
/* L1D_READ_ACCESS -> l1_dcache_read_access */
<0x10000 0x00000000 0x0000000c>,
/* L1D_READ_MISS -> l1_dcache_read_miss */
<0x10001 0x00000000 0x0000000d>,
/* L1D_WRITE_ACCESS -> l1_dcache_write_access */
<0x10002 0x00000000 0x0000000e>,
/* L1D_WRITE_MISS -> l1_dcache_write_miss */
<0x10003 0x00000000 0x0000000f>,
/* L1I_READ_ACCESS -> l1_icache_access */
<0x10008 0x00000000 0x00000001>,
/* L1I_READ_MISS -> l1_icache_miss */
<0x10009 0x00000000 0x00000002>,
/* LL_READ_ACCESS -> ll_cache_read_access */
<0x10010 0x00000000 0x00000010>,
/* LL_READ_MISS -> ll_cache_read_miss */
<0x10011 0x00000000 0x00000011>,
/* LL_WRITE_ACCESS -> ll_cache_write_access */
<0x10012 0x00000000 0x00000012>,
/* LL_WRITE_MISS -> ll_cache_write_miss */
<0x10013 0x00000000 0x00000013>,
/* DTLB_READ_MISS -> dtlb_miss */
<0x10019 0x00000000 0x00000004>,
/* ITLB_READ_MISS -> itlb_miss */
<0x10021 0x00000000 0x00000003>,
/* BPU_READ_ACCESS -> branch_direction_prediction */
<0x10030 0x00000000 0x0000001c>,
/* BPU_READ_MISS -> branch_direction_misprediction */
<0x10031 0x00000000 0x0000001b>;
riscv,event-to-mhpmcounters =
<0x00003 0x00003 0xfffffff8>,
<0x00004 0x00004 0xfffffff8>,
<0x00005 0x00005 0xfffffff8>,
<0x00006 0x00006 0xfffffff8>,
<0x00007 0x00007 0xfffffff8>,
<0x00008 0x00008 0xfffffff8>,
<0x00009 0x00009 0xfffffff8>,
<0x0000a 0x0000a 0xfffffff8>,
<0x10000 0x10000 0xfffffff8>,
<0x10001 0x10001 0xfffffff8>,
<0x10002 0x10002 0xfffffff8>,
<0x10003 0x10003 0xfffffff8>,
<0x10008 0x10008 0xfffffff8>,
<0x10009 0x10009 0xfffffff8>,
<0x10010 0x10010 0xfffffff8>,
<0x10011 0x10011 0xfffffff8>,
<0x10012 0x10012 0xfffffff8>,
<0x10013 0x10013 0xfffffff8>,
<0x10019 0x10019 0xfffffff8>,
<0x10021 0x10021 0xfffffff8>,
<0x10030 0x10030 0xfffffff8>,
<0x10031 0x10031 0xfffffff8>;
riscv,raw-event-to-mhpmcounters =
<0x00000000 0x00000001 0xffffffff 0xffffffff 0xfffffff8>,
<0x00000000 0x00000002 0xffffffff 0xffffffff 0xfffffff8>,
<0x00000000 0x00000003 0xffffffff 0xffffffff 0xfffffff8>,
<0x00000000 0x00000004 0xffffffff 0xffffffff 0xfffffff8>,
<0x00000000 0x00000005 0xffffffff 0xffffffff 0xfffffff8>,
<0x00000000 0x00000006 0xffffffff 0xffffffff 0xfffffff8>,
<0x00000000 0x00000007 0xffffffff 0xffffffff 0xfffffff8>,
<0x00000000 0x00000008 0xffffffff 0xffffffff 0xfffffff8>,
<0x00000000 0x00000009 0xffffffff 0xffffffff 0xfffffff8>,
<0x00000000 0x0000000a 0xffffffff 0xffffffff 0xfffffff8>,
<0x00000000 0x0000000b 0xffffffff 0xffffffff 0xfffffff8>,
<0x00000000 0x0000000c 0xffffffff 0xffffffff 0xfffffff8>,
<0x00000000 0x0000000d 0xffffffff 0xffffffff 0xfffffff8>,
<0x00000000 0x0000000e 0xffffffff 0xffffffff 0xfffffff8>,
<0x00000000 0x0000000f 0xffffffff 0xffffffff 0xfffffff8>,
<0x00000000 0x00000010 0xffffffff 0xffffffff 0xfffffff8>,
<0x00000000 0x00000011 0xffffffff 0xffffffff 0xfffffff8>,
<0x00000000 0x00000012 0xffffffff 0xffffffff 0xfffffff8>,
<0x00000000 0x00000013 0xffffffff 0xffffffff 0xfffffff8>,
<0x00000000 0x00000014 0xffffffff 0xffffffff 0xfffffff8>,
<0x00000000 0x00000015 0xffffffff 0xffffffff 0xfffffff8>,
<0x00000000 0x00000016 0xffffffff 0xffffffff 0xfffffff8>,
<0x00000000 0x00000017 0xffffffff 0xffffffff 0xfffffff8>,
<0x00000000 0x00000018 0xffffffff 0xffffffff 0xfffffff8>,
<0x00000000 0x00000019 0xffffffff 0xffffffff 0xfffffff8>,
<0x00000000 0x0000001a 0xffffffff 0xffffffff 0xfffffff8>,
<0x00000000 0x0000001b 0xffffffff 0xffffffff 0xfffffff8>,
<0x00000000 0x0000001c 0xffffffff 0xffffffff 0xfffffff8>,
<0x00000000 0x0000001d 0xffffffff 0xffffffff 0xfffffff8>,
<0x00000000 0x0000001e 0xffffffff 0xffffffff 0xfffffff8>,
<0x00000000 0x0000001f 0xffffffff 0xffffffff 0xfffffff8>,
<0x00000000 0x00000020 0xffffffff 0xffffffff 0xfffffff8>,
<0x00000000 0x00000021 0xffffffff 0xffffffff 0xfffffff8>,
<0x00000000 0x00000022 0xffffffff 0xffffffff 0xfffffff8>,
<0x00000000 0x00000023 0xffffffff 0xffffffff 0xfffffff8>,
<0x00000000 0x00000024 0xffffffff 0xffffffff 0xfffffff8>,
<0x00000000 0x00000025 0xffffffff 0xffffffff 0xfffffff8>,
<0x00000000 0x00000026 0xffffffff 0xffffffff 0xfffffff8>,
<0x00000000 0x00000027 0xffffffff 0xffffffff 0xfffffff8>,
<0x00000000 0x00000028 0xffffffff 0xffffffff 0xfffffff8>,
<0x00000000 0x00000029 0xffffffff 0xffffffff 0xfffffff8>,
<0x00000000 0x0000002a 0xffffffff 0xffffffff 0xfffffff8>;
};
For example, using perf stat & perf record:
# perf stat ls
Performance counter stats for 'ls':
74.05 msec task-clock # 0.747 CPUs utilized
0 context-switches # 0.000 /sec
0 cpu-migrations # 0.000 /sec
58 page-faults # 783.256 /sec
3689065 cycles # 0.050 GHz
1336494 instructions # 0.36 insn per cycle
162119 branches # 2.189 M/sec
28716 branch-misses # 17.71% of all branches
0.099143960 seconds time elapsed
0.016153000 seconds user
0.092880000 seconds sys
# echo 1000 > /proc/sys/kernel/perf_event_max_sample_rate # perf record -g ls perf.data [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.006 MB perf.data (9 samples) ]
We can use buildroot to compile rootfs with perf tool.
# git clone https://github.com/buildroot/buildroot.git # cd buildroot/ # make qemu_riscv64_virt_defconfig # make menuconfig
Enable the following PACKAGE config in menuconfig.
BR2_PACKAGE_LINUX_TOOLS=y BR2_PACKAGE_LINUX_TOOLS_PERF=y BR2_PACKAGE_ELFUTILS=y
Additional DTS examples(serial, bootargs with initrd):
serial@1900d000 {
compatible = "snps,dw-apb-uart";
reg = <0x0 0x1900d000 0x0 0x400>;
interrupt-parent = <&intc>;
interrupts = <20 4>;
clock-frequency = <36000000>;
clock-names = "baudclk";
reg-shift = <2>;
reg-io-width = <4>;
};
chosen {
bootargs = "console=ttyS0,115200 norandmaps loglevel=7";
linux,initrd-start = <0x0 0x64000000>;
linux,initrd-end = <0x0 0x66000000>;
stdout-path = "/soc/serial@1900d000:115200";
};
The 'serial' needs to be configured based on the actual configuration of 'reg', 'interrupts', 'clock-frequency', while the 'chosen' needs to be configured based on the actual configuration of 'linux,initrd-start', 'linux,initrd-end'.