Add aeotec door window sensor 8

drivers/SmartThings/zwave-sensor/fingerprints.yml

@@ -548,6 +548,11 @@ zwaveManufacturer:
     productType: 0x0100
     productId: 0x0082
     deviceProfileName: shelly-wave-motion
+  - id: "aeotec/contact/8"
+    deviceLabel: Aeotec Door Window Sensor 8
+    manufacturerId: 0x0371
+    productId: 0x0037
+    deviceProfileName: aeotec-door-window-sensor-8
 zwaveGeneric:
   - id: "GenericSensorAlarm"
     deviceLabel: Z-Wave Sensor

drivers/SmartThings/zwave-sensor/profiles/aeotec-door-window-sensor-8.yml

@@ -0,0 +1,181 @@
+name: aeotec-door-window-sensor-8
+components:
+- id: main
+  capabilities:
+  - id: contactSensor
+    version: 1
+  - id: temperatureMeasurement
+    config:
+      values:
+        - key: "temperature.value"
+          range: [-10, 60]
+    version: 1
+  - id: relativeHumidityMeasurement
+    version: 1
+  - id: dewPoint
+    version: 1
+  - id: moldHealthConcern
+    version: 1
+  - id: tamperAlert
+    version: 1
+  - id: powerSource
+    version: 1
+  - id: threeAxis
+    version: 1
+  - id: battery
+    version: 1
+  - id: refresh
+    version: 1
+categories:
+  - name: ContactSensor
+metadata:
+  deviceType: ContactSensor
+  ocfDeviceType: x.com.st.d.sensor.contact
+  deviceTypeId: ContactSensor
+preferences:
+  - name: "parameter1"
+    title: "1 Set threshold Check Time"
+    description: "When using battery power, follow this configuration, the minimum time is 30 seconds. When using USB power supply, for real-time detection."
+    required: false
+    preferenceType: integer
+    definition:
+      minimum: 0
+      maximum : 2678400
+      default: 900
+  - name: "parameter2"
+    title: "2 Min. temperature change to report"
+    required: false
+    preferenceType: integer
+    definition:
+      minimum: 0
+      maximum : 255
+      default: 20
+  - name: "parameter3"
+    title: "3 Min. humidity change to report"
+    required: false
+    preferenceType: integer
+    definition:
+      minimum: 0
+      maximum : 255
+      default: 50
+  - name: "parameter5"
+    title: "5 State when the magnet is close"
+    description: "This parameter allows to set the states of door/window when the magnet closes to the sensor."
+    required: false
+    preferenceType: enumeration
+    definition:
+      options:
+        0: "Open=magnet far, Closed=magnet near"
+        1: "Closed=magnet far, Open=magnet near"
+      default: 0
+  - name: "parameter13"
+    title: "13 Mold alarm offset"
+    desccription: "Increase the humidity threshold."
+    required: false
+    preferenceType: integer
+    definition:
+      minimum: -10
+      maximum : 10
+      default: 0
+  - name: "parameter23"
+    title: "23 Low battery threshold"
+    description: "Report low battery report when level goes under threshold setting."
+    required: false
+    preferenceType: integer
+    definition:
+      minimum: 10
+      maximum : 50
+      default: 20
+  - name: "parameter24"
+    title: "24 Periodic Reports"
+    description: "The period of battery, temperature and humidity report, the minimum time is 30 seconds."
+    required: false
+    preferenceType: integer
+    definition:
+      minimum: 0
+      maximum : 2678400
+      default: 43200
+  - name: "parameter25"
+    title: "25 Offset value for temperature"
+    description: "Calibrate temperature. Scale is defined by Param 64 .eg: Value 15 means 1.5°C or 1.5F."
+    required: false
+    preferenceType: integer
+    definition:
+      minimum: -200
+      maximum : 200
+      default: 0
+  - name: "parameter26"
+    title: "26 Offset value for Humidity"
+    description: "Calibrate humidity."
+    required: false
+    preferenceType: integer
+    definition:
+      minimum: -200
+      maximum : 200
+      default: 0
+  - name: "parameter27"
+    title: "27 Set tilt sensor mode"
+    description: "Set tilt sensor mode."
+    required: false
+    preferenceType: enumeration
+    definition:
+      options:
+        0: "Disable"
+        1: "Enabled. Needs magnet"
+        2: "Enabled. It can used without magnet."
+      default: 1
+  - name: "parameter28"
+    title: "28 State of tilt in Mode 2"
+    description: "This parameter allows setting the state of door/window when the sensor is tilted."
+    required: false
+    preferenceType: enumeration
+    definition:
+      options:
+        0: "Opened = tilted, closed = not tilted"
+        1: "Closed = tilted, opened = not tilted"
+      default: 0
+  - name: "parameter33"
+    title: "33 Tilt triggered angle"
+    description: "With this parameter, you can adjust the tilt triggered angle if the tilt is too low or too strong."
+    required: false
+    preferenceType: integer
+    definition:
+      minimum: 1
+      maximum : 90
+      default: 5
+  - name: "parameter34"
+    title: "34 Timeout tilt detection Mode 1"
+    description: "Set the timeout of tilt detection Mode 1."
+    required: false
+    preferenceType: integer
+    definition:
+      minimum: 5
+      maximum : 60
+      default: 5
+  - name: "parameter35"
+    title: "35 Timeout tilt detection Mode 2"
+    description: "Set the timeout of tilt detection Mode 2."
+    required: false
+    preferenceType: integer
+    definition:
+      minimum: 5
+      maximum : 60
+      default: 8
+  - name: "parameter36"
+    title: "36 Min. acc. change to report"
+    description: "Minimum acceleration change to trigger report"
+    required: false
+    preferenceType: integer
+    definition:
+      minimum: 0
+      maximum : 255
+      default: 0
+  - name: "parameter64"
+    title: "64 Temperature Scale"
+    description: "Scale for auto reports and settings."
+    required: false
+    preferenceType: enumeration
+    definition:
+      options:
+        0: "Celsius"
+        1: "Fahrenheit"

drivers/SmartThings/zwave-sensor/src/aeotec-door-window-sensor-8/init.lua

@@ -0,0 +1,181 @@
+-- Copyright 2025 SmartThings
+--
+-- Licensed under the Apache License, Version 2.0 (the "License");
+-- you may not use this file except in compliance with the License.
+-- You may obtain a copy of the License at
+--
+--     http://www.apache.org/licenses/LICENSE-2.0
+--
+-- Unless required by applicable law or agreed to in writing, software
+-- distributed under the License is distributed on an "AS IS" BASIS,
+-- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+-- See the License for the specific language governing permissions and
+-- limitations under the License.
+
+local capabilities = require "st.capabilities"
+--- @type st.zwave.CommandClass
+local cc = require "st.zwave.CommandClass"
+--- @type st.zwave.CommandClass.Notification
+local Notification = (require "st.zwave.CommandClass.Notification")({ version = 3 })
+--- @type st.zwave.CommandClass.Battery
+local Battery = (require "st.zwave.CommandClass.Battery")({ version = 1 })
+--- @type st.zwave.CommandClass.SensorMultilevel
+local SensorMultilevel = (require "st.zwave.CommandClass.SensorMultilevel")({ version = 11 })
+--- @type st.zwave.CommandClass.Configuration
+local Configuration = (require "st.zwave.CommandClass.Configuration")({ version = 4 })
+
+local log = require "log"
+
+local MoldHealthConcern = capabilities.moldHealthConcern
+local ContactSensor = capabilities.contactSensor
+local PowerSource = capabilities.powerSource
+local ThreeAxis = capabilities.threeAxis
+local TamperAlert = capabilities.tamperAlert
+
+local AEOTEC_DOOR_WINDOW_SENSOR_8_FINGERPRINTS = {
+  { manufacturerId = 0x0371, productId = 0x0037 } -- Aeotec Door Window Sensor 8 EU/US/AU
+}
+
+local function can_handle_aeotec_door_window_sensor_8(opts, driver, device, ...)
+  for _, fingerprint in ipairs(AEOTEC_DOOR_WINDOW_SENSOR_8_FINGERPRINTS) do
+    if device:id_match(fingerprint.manufacturerId, fingerprint.productType, fingerprint.productId) then
+      local subdriver = require("aeotec-door-window-sensor-8")
+      return true, subdriver
+    end
+  end
+  return false
+end
+
+local function added_handler(driver, device)
+  device:send(Configuration:Get({ parameter_number = 10 }))
+
+  device:emit_event(MoldHealthConcern.supportedMoldValues({"good", "moderate"}))
+
+  -- Default value
+  device:emit_event(MoldHealthConcern.moldHealthConcern.good())
+
+  -- Default value
+  device:emit_event(PowerSource.powerSource.battery())
+
+  device:send(Battery:Get({}))
+end
+
+local function device_init(driver, device)
+  device:set_field("three_axis_x", 0)
+  device:set_field("three_axis_y", 0)
+  device:set_field("three_axis_z", 0)
+end
+
+local function do_refresh(driver, device)
+  device:send(Battery:Get({}))
+end
+
+local function notification_report_handler(self, device, cmd)
+  local event
+
+  -- DOOR_WINDOW
+  if cmd.args.notification_type == Notification.notification_type.ACCESS_CONTROL then
+    if cmd.args.event == Notification.event.access_control.WINDOW_DOOR_IS_CLOSED then
+      event = ContactSensor.contact.closed()
+    elseif cmd.args.event == Notification.event.access_control.WINDOW_DOOR_IS_OPEN then
+      event = ContactSensor.contact.open()
+    end
+  end
+
+  -- POWER
+  if cmd.args.notification_type == Notification.notification_type.POWER_MANAGEMENT then
+    if cmd.args.event == Notification.event.power_management.AC_MAINS_DISCONNECTED then
+      event = PowerSource.powerSource.battery()
+    elseif cmd.args.event == Notification.event.power_management.AC_MAINS_RE_CONNECTED then
+      event = PowerSource.powerSource.mains()
+    elseif cmd.args.event == Notification.event.power_management.POWER_HAS_BEEN_APPLIED then
+      device:send(Battery:Get({}))
+    end
+  end
+
+  -- MOLD
+  if cmd.args.notification_type == Notification.notification_type.WEATHER_ALARM then
+    if cmd.args.event == Notification.event.weather_alarm.STATE_IDLE then
+      event = MoldHealthConcern.moldHealthConcern.good()
+    elseif cmd.args.event == Notification.event.weather_alarm.MOISTURE_ALARM then
+      event = MoldHealthConcern.moldHealthConcern.moderate()
+    end
+  end
+
+  -- TAMPER
+  if cmd.args.notification_type == Notification.notification_type.HOME_SECURITY then
+    if cmd.args.event == Notification.event.home_security.STATE_IDLE then
+      log.info("STATE_IDLE")
+      event = TamperAlert.tamper.clear()
+    elseif cmd.args.event == Notification.event.home_security.TAMPERING_PRODUCT_COVER_REMOVED then
+      log.info("TAMPERING_PRODUCT_COVER_REMOVED")
+      event = TamperAlert.tamper.detected()
+    end
+  end
+
+  if (event ~= nil) then
+    device:emit_event(event)
+  end
+end
+
+local function sensor_multilevel_report_handler(self, device, cmd) 
+  local event
+  local sensor_type = cmd.args.sensor_type
+  local value = cmd.args.sensor_value
+
+  local x = device:get_field("three_axis_x") or 0
+  local y = device:get_field("three_axis_y") or 0
+  local z = device:get_field("three_axis_z") or 0
+
+  local MIN_VAL = -10000
+  local MAX_VAL = 10000
+  -- log.info(string.format("SensorMultilevel: type=%d, raw=%.1f", sensor_type, value))
+  value = math.max(MIN_VAL, math.min(MAX_VAL, value))
+  -- log.info(string.format("Clamped: %.1f", value))
+
+  if (sensor_type == SensorMultilevel.sensor_type.ACCELERATION_X_AXIS) then
+    x = value
+    device:set_field("three_axis_x", x)
+    event = ThreeAxis.threeAxis(x, y, z)
+  elseif (sensor_type == SensorMultilevel.sensor_type.ACCELERATION_Y_AXIS) then
+    y = value
+    device:set_field("three_axis_y", y)
+    event = ThreeAxis.threeAxis(x, y, z)
+  elseif (sensor_type == SensorMultilevel.sensor_type.ACCELERATION_Z_AXIS) then
+    z = value
+    device:set_field("three_axis_z", z)
+    event = ThreeAxis.threeAxis(x, y, z)
+  end
+
+  if (event ~= nil) then
+    device:emit_event(event)
+  end
+end
+
+local aeotec_door_window_sensor_8 = {
+  supported_capabilities = {
+    capabilities.powerSource,
+    capabilities.threeAxis,
+  },
+  zwave_handlers = {
+    [cc.NOTIFICATION] = {
+      [Notification.REPORT] = notification_report_handler
+    },
+    -- [cc.SENSOR_MULTILEVEL] = {
+    --   [SensorMultilevel.REPORT] = sensor_multilevel_report_handler
+    -- }
+  },
+  capability_handlers = {
+    [capabilities.refresh.ID] = {
+      [capabilities.refresh.commands.refresh.NAME] = do_refresh
+    }
+  },
+  lifecycle_handlers = {
+    init = device_init,
+    added = added_handler
+  },
+  NAME = "Aeotec Door Window Sensor  8",
+  can_handle = can_handle_aeotec_door_window_sensor_8
+}
+
+return aeotec_door_window_sensor_8

drivers/SmartThings/zwave-sensor/src/init.lua

@@ -153,6 +153,7 @@ local driver_template = {
     lazy_load_if_possible("timed-tamper-clear"),
     lazy_load_if_possible("wakeup-no-poll"),
     lazy_load_if_possible("apiv6_bugfix"),
+    lazy_load_if_possible("aeotec-door-window-sensor-8"),
   },
   lifecycle_handlers = {
     added = added_handler,