Conversation
|
Here is the driver logs for on boarding a new button, I've added lines beginning with |
| address_header = addrh, | ||
| body = message_body, | ||
| }) | ||
| device:send(tx) |
There was a problem hiding this comment.
I was hoping that doing this would allow the device itself to send an accurate state, instead of treating it like a stateless dimmer where events are either < or > 3. I am now seeing this go out and maybe get acknowledged but not change in the device.
# received read request
< ZigbeeMessageRx || type: 0x00, < AddressHeader || src_addr: 0xF298, src_endpoint: 0x01, dest_addr: 0x0000, dest_endpoint: 0xFF, profile: 0x0104, cluster: Level >, lqi: 0xC4, rssi: -61, body_length: 0x0005, < ZCLMessageBody || < ZCLHeader || frame_ctrl: 0x10, seqno: 0x75, ZCLCommandId: 0x00 >, < ReadAttribute || AttributeId: 0x0000 > > >
# sent response
< ZigbeeMessageTx || Uint16: 0x0000, < AddressHeader || src_addr: 0x0000, src_endpoint: 0x01, dest_addr: 0xF298, dest_endpoint: 0x01, profile: 0x0104, cluster: Level >, < ZCLMessageBody || < ZCLHeader || frame_ctrl: 0x00, seqno: 0x00, ZCLCommandId: 0x01 >, < ReadAttributeResponse || < AttributeRecord || attr_id: 0x0000, ZclStatus: SUCCESS, DataType: Uint8, data: 0xE5 > > > >
# Level
< ZigbeeMessageRx || type: 0x00, < AddressHeader || src_addr: 0xF298, src_endpoint: 0x01, dest_addr: 0x0000, dest_endpoint: 0xFF, profile: 0x0104, cluster: Level >, lqi: 0xD4, rssi: -64, body_length: 0x0006, < ZCLMessageBody || < ZCLHeader || frame_ctrl: 0x11, seqno: 0x77, ZCLCommandId: 0x04 >, < MoveToLevelWithOnOff || level: 0x02, transition_time: 0x0002 > > >
# ack?
< ZigbeeMessageRx || type: 0x00, < AddressHeader || src_addr: 0xF298, src_endpoint: 0x01, dest_addr: 0x0000, dest_endpoint: 0x01, profile: 0x0104, cluster: Level >, lqi: 0xD6, rssi: -64, body_length: 0x0005, < ZCLMessageBody || < ZCLHeader || frame_ctrl: 0x08, seqno: 0x14, ZCLCommandId: 0x0B >, < DefaultResponse || cmd: 0x01, ZclStatus: SUCCESS > > >It seems odd that we get the MoveToLevel event before the ack (assuming that it is an ack?)
lutron-aurora/src/init.lua
Outdated
| if not self.environment_info.hub_zigbee_eui then | ||
| return self:call_with_delay(1, function() | ||
| do_configure(self, device) | ||
| end) | ||
| end |
There was a problem hiding this comment.
were you running into this happening during testing?
There was a problem hiding this comment.
Not really, just when I was trying to get some already onboarded devices reconfigured so I was calling this from added
| capabilities: | ||
| - id: button | ||
| version: 1 | ||
| - id: switchLevel |
There was a problem hiding this comment.
It is sort of up in the air, this is currently setup to just be a button and a dimmer but it could be a switch instead
FreeMasen
force-pushed
the
feat/phillips-aurora
branch
from
24ecf70 to
7fe5f5d
Compare
3 participants
No description provided.