Missing pinout for KB-link (nano:bit)

[gbraad]

The pinout for the KB-link with the nanobit is missing

-------------
| (6) | [1] |
| (5) | (2) |
| (4) | (3) |
-------------
Note: as seen from the top of the module

Note: needs to be rotate counter-clockwise to match the pinout above

1. GND
2. SWDCLK
3. VCC (3.3v)
4. ? NC (not connected? not needed for programming)
5. ? SWDIO/nRESET
6. ? NC (not connected? not needed for programming)

[gbraad]

Succesfully used the KB-link to program a PTR5188 module. So pretty sure the pinout is correct.

Ref: https://www.youtube.com/watch?v=ihY9wL2Yckk

[gbraad]

(6) is actually connected to 3V3, so this is a regulated power pin. However not necessary for programming as VIN is provided.

(4) is also connected across, but not connected to a pin on the SOC or headers

[gbraad]

Finally added?

Note: however this conflicts with my findings related to the VCC (3V3)